Mill Finished Aluminum Corner Tile Trim 2400mm Length ISO14001 Certification

Wall Decoration Aluminium Panel Trim UV Board Protection Tile Corner

 

Application

Mill finish surfaces should be degreased with white spirit,followed by cleaning with mild detergent and rinsing with clean cold water. Wipe over with a dry soft cloth.


Feature

• Suitable For 10mm Panels Only
• 2400mm Length - Chrome Finish
• Used On All 90 Degree Internal Corners
• Low Maintenance - Quick & Easy To Install
• Perfect For Bathrooms, Showers, Kitchens & Wet Walls
• Trims Are Delivered Free When Purchased With Panels

Use
 

Mill finish (untreated)

External applications

When used externally mill finish aluminium requires regular cleaning to maintain a relatively good standard of appearance. The frequency and cleaning method suggested is dependent on the local environmental conditions.If a cleaning programme is adopted from outset, the surfaces concerned will respond to the following treatment:

• Remove any grease or oil deposits with organic solvent such as white spirit.

• Swab down with a diluted solution of mild detergent followed by rinsing with clean cold water.To retain a reasonable surface appearance, frequency of cleaning will vary from once or twice a year in rural areas;to three or four times per year in mild industrial areas; to once monthly in severely polluted or marine environments.Cleaning long established but neglected installations of aluminium will probably require one or more of the following methods, depending on the severity of the surface contamination.

• Bristle brush and dilute detergent e.g. Fairy Liquid

• Polishing compounds e.g. Brasso

• Nylon pad impregnated with abrasives e.g. Scotchbrite

• Steel wool in conjunction with dilute detergent

Specification